2 ports XFP to XFP 10G WDM Transponder OEO Converter 8G~10G w/2R Support
Standalone 10G OEO Converter Repeater with XFP Slot to XFP Slot, which uses optical -electricity – optical conversion principle to realize optical signal regeneration, enabling of the optical signal amplification and regeneration, and wavelength conversion, with coarse /dense wavelength division multiplexing together to realized WDM transmission. It is now possible to quickly improve communication capacity, expand the bandwidth on present network, while using low-cost, high cost-effective solutions to manage and run the system, easy operation.
Key Features
-
Support Jumbo Frame
-
Transparent Transport and very low delay
-
Support ITUT prescribed DWDM/CWDM wavelength
-
Support hot plugging
-
Support 2U Rack (16 channel) and standalone use
-
Full State Led display
-
Easy installation
Specifications
Performance Data |
Technical Indexes |
Transmission Speed |
8.5Gb/s-11.35Gb/s |
Protocols |
8.5G Fiber Channel |
SONET OC-192, SDH STM-64 (9.95Gbps) |
10G WAN (10Gbps) |
10G LAN (10.31Gbps) |
OTN OTU-2 (G.709) (10.70Gbps) |
10G LAN with 255/237 FEC coding (11.09Gbps) |
10G Fiber Channel (11.32Gbps) |
10G POS |
Interface Type |
XFP to XFP |
Transmission Distance |
XFP module: Up to 80Km |
Maximum Packet |
14,880,950/S |
Forwarding Rate |
power requirement |
Rack-mountable : AC 85 ~ 220V OR DC -48V |
Standalone: AC 110~220V OR -48V |
Power consumption: ≤4W |
Work Environment |
Operating Temp: 0~ 50 ℃ |
Storage Temp: -10~ 70 ℃ |
Humidity: 5%~90% ( non-condensing ) |
Dimension |
Card : 115mm ( W ) × 78mm ( D ) |
Standalone : 156mm ( W ) × 128mm ( D ) × 32mm( H ) |